automatic

I have a 01 ranger automatic, its a 2.3 and doesn't give me what I need. I want something much bigger and have no idea where to start. I need to know from you all what I can do. Prices, which vehicle is ideal to take the motor from, and any specifics that I need. I don't have a large amount of...

1997 Ford Explorer 4L SOHC So I did an Automatic Trans swap from 5R55E to the 5 peed M50D. all is well but the computer is not liking it! Here is what I did: On the Transmission wiring harness, from the two big connectors at the back of the engine, I cut out the DTR connector and used the...

I have a 2006 Ford Ranger Sport 2WD 3.0L V6 Automatic. It's a daily driver and gets me to and from work everyday. I noticed that while driving on the interstate, when I am over speeds of 65+ MPH and I accelerate (pedal to the metal) it feels like the transmission slips into neutral and over...

Hey I just Put a 2000 auto transmission in my 1997 3.0 ranger and once in place realized that there was no vss on the tail end of the transmission so I went online and read that on 98 and newer rangers they put the vss on the rear end and it works with the abs(i think not completely sure). Is...

I've searched and searched and can't find a thread that remotely answers this. I've driven dad's 2000 Explorer and it doesn't seem to do this and he does absolutely nothing to maintain his vehicle. So here goes: 4r44e Trans. It takes at LEAST a half mile of steady 60 mph before the torque...

Ok, I have a 1988 ranger 4x4 with an automatic and the push button 4x4. The push button 4x4 has given me trouble ever since I got the Ranger.:bawling: My question is what is all needed to put a manual T-case in? Any info will help thanks, Seth

ok, so i just replaced the felxplate on my 1990 ranger 2.9 v6 4x4 automatic. put everything back together, and now when i accelerate it has no power but once it gets going it starts catching up, then when it shifts into 4th it bogs down a lil bit, and it wont shift into overdrive, does anyone...

ok so i have a 1990 ranger 2.9l v6 4x4 with auto trans, has a rebuilt trans in it, it sat for the winter. my problem is its not shifting right at all, i have to release the throttle to get it to shift but when i try going faster it downshifts again, warm or cold, im thinking it could be a vacuum...