greaseyfingers
Member
- Joined
- Nov 4, 2007
- Messages
- 340
- Reaction score
- 1
- Points
- 18
- Age
- 52
- Location
- Crookston, Mn.
- Vehicle Year
- 1987
- Make / Model
- Ford
- Transmission
- Manual
The used 4x4 front drive axles I bought, before, don't have the large flat washer, like, piece that the seal goes next to, on each drive axle's slined yoke collar flange..
I'm assuming the piece that's missing on each front drive axle, as mentioned, is to help keep crude from going through the kunckle's hole, which the drive axle passes through, as it goes into the center of the spindle hub..
Where can a person get these pieces that are missing on each front drive axle..
Or, isn't it that big of a deal, running without them, where I need to worry about replacing these pieces that are missing on each drive axle..
I'm assuming the piece that's missing on each front drive axle, as mentioned, is to help keep crude from going through the kunckle's hole, which the drive axle passes through, as it goes into the center of the spindle hub..
Where can a person get these pieces that are missing on each front drive axle..
Or, isn't it that big of a deal, running without them, where I need to worry about replacing these pieces that are missing on each drive axle..
Last edited: