javis
New Member
- Joined
- Apr 12, 2021
- Messages
- 6
- Reaction score
- 1
- Points
- 3
- Location
- Oklahoma City, Oklahoma USA
- Vehicle Year
- 1996
- Make / Model
- Ford Ranger
- Transmission
- Automatic
Hello. I have replaced the axle bushings. the driver's side was no problem, I was able to center the bushing in the axle hole. The problem is the other side, if I center the bushing in the axle hole, the axle rubs against a part of the chassis, so I had to leave the bushing flush in the part with the smallest diameter, so that there is a separation between the axle and the chassis part. Can I just leave it like that? I look forward to your advice and opinions. Thanks.