Caleb_19
Member
- Joined
- Jun 26, 2014
- Messages
- 55
- Reaction score
- 0
- Points
- 6
- Vehicle Year
- 2007
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Automatic
Hey everyone,
I have a 2007 Ranger 4x4 with a 4.0. Has an 8.8 rear end with an open different and 3.73 gears. When I bought the truck the older gentleman had removed the stock helper springs from the leaf pack so it would ride softer. I put a set of larger 265/75 R16 tires on and without the helper springs the tires will catch the lip of the fender when compressed too much. He gave me the springs when I bought the truck and I want to reinstall them but I'm not sure exactly how to go about it. Can anyone give me some advice? I tried searching, but all I could find was aftermarket helper springs not how to reinstall stock one.
Thanks!
Sent from my SM-G900T using Tapatalk
I have a 2007 Ranger 4x4 with a 4.0. Has an 8.8 rear end with an open different and 3.73 gears. When I bought the truck the older gentleman had removed the stock helper springs from the leaf pack so it would ride softer. I put a set of larger 265/75 R16 tires on and without the helper springs the tires will catch the lip of the fender when compressed too much. He gave me the springs when I bought the truck and I want to reinstall them but I'm not sure exactly how to go about it. Can anyone give me some advice? I tried searching, but all I could find was aftermarket helper springs not how to reinstall stock one.
Thanks!
Sent from my SM-G900T using Tapatalk