$30 Cat back for Ranger!

[GOskidmark]

Why spend $170+ for a catback when you can make it yourself! It only took me about 45 minutes to build and slap on. I do not have a tube bender, that cost me $5 to have it bent at a local shop. The metal and muffler was $25!

Not bad for a novice.

 

[jhammel85]

Looks good! Sounds good?

 

[GOskidmark]

Looks good! Sounds good?

It sounds decent. It's hard to get a V6 to sound good.

 

[89PBR96]

Looks good man kinda like mine

 

[The purple one]

$30 Thats way too much. I used one off a truck I junked. Cost -$

 

[buffster1980]

thanks for the idea bro, i'm going to do something like this on my truck, but with a dual outlet muffler, and 2 pipes coming out side-by-side with some nice slash cut tips...

 

[jhammel85]

I did my exhaust like this during thanksgiving weekend. The body of the muffler was a bit long and I wanted it to do them at an angle so I had to move it up about 8 inches (just under the hanger after the cat). I used a 90 and a 45 to get the right angle and I welded it the bottle of the leaf spring shackle. Not bad, I just wish it didn't look so odd, like it's angled waaay up from the front in the 2nd pic. I just need to cut it back an inch or so and level out the tip.