- Joined
- Nov 7, 2009
- Messages
- 1,802
- Reaction score
- 13
- Points
- 0
- Location
- White Pine, TN
- Vehicle Year
- 1988/1989
- Make / Model
- Ford
- Engine Size
- 302/2.9
- Transmission
- Automatic
I was wondering how I can submit some info about the LED for the Tail/Turn lights.
The tech forum says to install a resistor in line so the turn signals will flash properly, a easier thing to do is to buy a electronic turn signal flasher, they are like 10 to 12 dollors, and we used them all the time on 18wheelers, they don't care how many lights are hooked up, in fact they will flash with just the dash board light working.
I had a Kenworth that had 6 turn lights on each side and that is NOT counting
the trailor turn signal lights and they didn't flash super fast.
Just wanted to add this to the forum so if someone doesnt want to cut wires they can use this instead.
Robert
The tech forum says to install a resistor in line so the turn signals will flash properly, a easier thing to do is to buy a electronic turn signal flasher, they are like 10 to 12 dollors, and we used them all the time on 18wheelers, they don't care how many lights are hooked up, in fact they will flash with just the dash board light working.
I had a Kenworth that had 6 turn lights on each side and that is NOT counting
the trailor turn signal lights and they didn't flash super fast.
Just wanted to add this to the forum so if someone doesnt want to cut wires they can use this instead.
Robert