• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Air in the system


Tutokes31

New Member
Joined
Dec 16, 2007
Messages
3
Reaction score
0
Points
0
Age
36
Vehicle Year
1999
Make / Model
ford
Transmission
Automatic
Hey guys im having some problems with my radiator in my 99 3.0 flex fuel ranger. First it was overheating and I changed the water pump, now that i changed it, it has quit overheating but most of the antifreeze leaves the engine and comes up into the antifreeze over fill bottle. The antifreeze stops coming out of the bottle but now air bubbles are coming up into the over fill bottle(i can see them in the bottle). At first i thought there was just air in the system from filling up the radiator but the air is still coming through into the over fill bottle any thoughts on this? oh and is there some type of air bleeder valve anywhere? if so where at
 


Wicked_Sludge

New Member
Joined
Aug 6, 2007
Messages
6,937
Reaction score
43
Points
0
Age
38
Location
Westport, WA
Vehicle Year
1993
Make / Model
Ford
Engine Size
3-point-GO
Transmission
Manual
there is no bleed valve.

your truck uses the pressurized overflow bottle, yes? with these types of systems the easiest way to bleed the air out is to just keep filling it as it sucks the coolant out of the bottle. eventually it'll "burp" all the air out.

if your worried youve blown a head gasket than you need to perform a compression test.
 

dwcallis

New Member
Joined
Dec 26, 2007
Messages
1
Reaction score
0
Points
0
Age
48
Vehicle Year
1998
Make / Model
Ford
Transmission
Automatic
I had the same issue with anti freeze overflowing out my overflow. I changed ny thermastat, and that didn't fix it. So I had a test ran for my heads/or gaskets. And sure enough the test came back with exhaust fumes in my fluid. After we tore it down, I did have a blowed out head gasket on the drivers side. We went ahead and tore down the passenger's side, and it was bout to go out too.
 

dirtsquirt

New Member
Joined
Dec 3, 2007
Messages
486
Reaction score
0
Points
0
Location
Edmonton Alberta Canada
Vehicle Year
1987 and 2005
Make / Model
ford And jeep
Engine Size
2.9 And 4.0
Transmission
Manual
Sounds like your head gaskets are leaking. fill your rad up leave the cap off and watch for bubbles. if you get bubbles, it's head gasket 1 or both
 

Tutokes31

New Member
Joined
Dec 16, 2007
Messages
3
Reaction score
0
Points
0
Age
36
Vehicle Year
1999
Make / Model
ford
Transmission
Automatic
yea i just started tearing it apart now, thats all i have pretty much heard is that its head gasket. ill give it a shot see what we can do




if your worried youve blown a head gasket than you need to perform a compression test.

as of that if you do a compression test on a vehicle with 100k or more miles on somethin is gonna get messed up, the guy that had it before me did it and blew half of the lines off i wouldnt recommend doing that too often
 

Sponsored Ad


Sponsored Ad

Staff online

Members online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Mudtruggy
May Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top