- Joined
- Jun 9, 2009
- Messages
- 619
- Reaction score
- 2
- Points
- 18
- Location
- Loveland Colorado
- Vehicle Year
- 1993
- Make / Model
- Ford
- Engine Size
- 5.ohh nooo
- Transmission
- Automatic
welp. im bored atm so i decided to go ahead and start my build thread.
i already have allot of stuff done, but ill try to find some old pics and be as chronological as possible.
when i first got the truck :
1994 ranger STX 3.0L 4x4
i was driving my brother around with our cousin teaching him how to hunt prairie dogs while on the move.
first time i took it mudding :
next step was to remove add exhaust and tail lights , window tint:
so i went with magna-flow cat back duals, added a magnaflow high flow cat , and some euro lights, dont remember the specs on the tint (like it matters)
next step was to remove fender flares and add 31's :
that basically worked for me for about a year or something then i had to do something else,
the route i took was to add an 8.8" ranger rear end with 4.10's and a new D35 with 4.10's; add f150 coils and spacers, picked up a set of super lift rear leaf springs for $50 and used those, gave me about 4" lift in the back , 3" in the front , also got a nice topper for $150 off CL
:
everything on and set back on the ground :
up in the mountains :
flat tire while climbing a hill, we were trying to air it up haha:
flexing :
some other junk i did while i was in this stage of the build :
2 10" subs:
amp and stuff :
added new instrument cluster prints also modified some instrument cluster needles i got out of a late 90's early 2000's mazda b-something they are neon orange :
added blue lights in the cab and an alpine deck :
after all that i kind of stopped working on it for about a year so i could make some headway on my 1940 merc project
im bored now though, have some more junk to post up (6" lift etc.etc.) , but ill save that for tomorrow
thanks for lookin!
i already have allot of stuff done, but ill try to find some old pics and be as chronological as possible.
when i first got the truck :
1994 ranger STX 3.0L 4x4
i was driving my brother around with our cousin teaching him how to hunt prairie dogs while on the move.
first time i took it mudding :
next step was to remove add exhaust and tail lights , window tint:
so i went with magna-flow cat back duals, added a magnaflow high flow cat , and some euro lights, dont remember the specs on the tint (like it matters)
next step was to remove fender flares and add 31's :
that basically worked for me for about a year or something then i had to do something else,
the route i took was to add an 8.8" ranger rear end with 4.10's and a new D35 with 4.10's; add f150 coils and spacers, picked up a set of super lift rear leaf springs for $50 and used those, gave me about 4" lift in the back , 3" in the front , also got a nice topper for $150 off CL
:
everything on and set back on the ground :
up in the mountains :
flat tire while climbing a hill, we were trying to air it up haha:
flexing :
some other junk i did while i was in this stage of the build :
2 10" subs:
amp and stuff :
added new instrument cluster prints also modified some instrument cluster needles i got out of a late 90's early 2000's mazda b-something they are neon orange :
added blue lights in the cab and an alpine deck :
after all that i kind of stopped working on it for about a year so i could make some headway on my 1940 merc project
im bored now though, have some more junk to post up (6" lift etc.etc.) , but ill save that for tomorrow
thanks for lookin!