nsmar4211
New Member
- Joined
- Apr 9, 2018
- Messages
- 15
- Reaction score
- 2
- Points
- 3
- Vehicle Year
- 1999
- Make / Model
- Ranger
- Engine Type
- 3.0 V6
- Transmission
- Automatic
- 2WD / 4WD
- 2WD
1996 Ranger, 2.3L engine. Started throwing codes shortly after being purchased. Replaced both oxygen sensors, replaced the computer. Still throwing the same codes :
P1132 Lack of Ho2S11 Switches-Sensor indicates rich
P0141 02 Sensor Heater Circuit Bank 1 Sensor 2
P0135 02 Sensor Heater Sercuit Bank 1 Sensor 1
P0136 02 Sensor Circuit Bank 1 Sensor 2
Have also replaced all 8 plugs, wires, and coil packs due to running rough (and it turned out the primary plugs coil pack wasn't even plugged all the way in, so it was running on the secondary ones. And the wires were put on in the wrong places on the primary coil pack). Replaced the carbon canister and 2 sensors inline with that. Replaced the MAF.
Edit: Current symptoms are intermittant lack of power, once in a while random stall (it's a manual but that's not the stall).
Thoughts? Things to try next?