Welcome Visitor! Please take a few seconds and e-ranger
New Member
- Joined
- Dec 30, 2007
- Messages
- 15
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1990
- Make / Model
- Ford
- Transmission
- Automatic
Hi,
I've got a '90 4.0L Ranger. The heads are cracked and I was considering just puting a new motor in it rather than fix the heads (high milage and 2 dead lifters also are a part of the problem.) I may end up doing a v8 conversion, but would prefer to stick with the six, because the trans is good and I don't want to put a lot of work into it now.
What years are interchangeable? Remember if there is a flywheel issue or something similar, I have a complete 4.0L to use for parts. Also, can I use the same computer and intake/injection components? Thanks in advance.
Erik
I've got a '90 4.0L Ranger. The heads are cracked and I was considering just puting a new motor in it rather than fix the heads (high milage and 2 dead lifters also are a part of the problem.) I may end up doing a v8 conversion, but would prefer to stick with the six, because the trans is good and I don't want to put a lot of work into it now.
What years are interchangeable? Remember if there is a flywheel issue or something similar, I have a complete 4.0L to use for parts. Also, can I use the same computer and intake/injection components? Thanks in advance.
Erik
