- Joined
- Oct 5, 2007
- Messages
- 5,402
- Reaction score
- 2,989
- Points
- 113
- Location
- Toledo Ohio
- Vehicle Year
- 20002005199
- Make / Model
- Fords
- Engine Size
- 3.0 2.3
the roller bearing pictured is for the outer set.So I picked up the bearings and wheel seals and it appears that backside race isn't installed. Can someone look at this rotor and confirm please. This is my first time dealing with front wheel bearings. I suspect I should rent a race installation tool from the parts store. Thanks in advance!
in the helpful hint files...
new hub/rotor units that have the races pre-installed can be very difficult to remove the races. the hub casting does not always
have cut-outs or slots allowing access to the race with tools.
the hub pictured is one of those.