ford 7.5 carrier ?

[liftedredranger]

i have a set of 4:56 gears for a 7.5 that I bought with a carrier but is there any difference between a stock carrier????? i need to know i have a race coming up and i need to get my racer done lol.

 

[Sprag-O]

I believe all the stock carriers are the same... they don't have a size jump like most the Dana carriers do..

a carrier that houses 3.45s or 3.73's should be able to work with 4.10's, and 4.56's....

You will want to make sure you have a good notched pin, mine was notched in my 3.73 carrier, but wouldnt make it past the 4.10 ring gear.

 

[Hahnsb2]

Notched pins are weak. Clearence the tooth on the ring gear instead. I did and still managed to break the full un-modified crosspin, prbably would have broke a nothed one much quicker.

 

[liftedredranger]

ok cool i have the one with the gears but they are welded and i just blew out apart so i dont want one anymore

 

[Sprag-O]

A factory notched cross-pin thats been hardened after cut should be pretty tough...

I was going to notch my ring gear, but it looked like I was going to have to have to take way to much off the 2 teeth