z987k
New Member
- Joined
- Jan 28, 2010
- Messages
- 23
- Reaction score
- 0
- Points
- 0
- Location
- Portland, OR
- Vehicle Year
- 1993
- Make / Model
- Ford
- Engine Size
- 4.0L
- Transmission
- Manual
So I bought a ranger used from a guy at a good price since it needed a few things. Well one of those things is he had the headlight ghetto rigged up and running straight off the battery. Removing the wire from the battery to turn them off.
I figured all I needed to do was hook the lights back up to the original harness, but I find that there is no power to the wires that should go to the lights. (black w/ green stripe and green w/ black stripe) No idea why.
I'm wondering where the best place is to put new wire in and run it to something switched by the switch in the cab. Anyone know where a fuse/ relay that is switched is that I could pull power from?
I figured all I needed to do was hook the lights back up to the original harness, but I find that there is no power to the wires that should go to the lights. (black w/ green stripe and green w/ black stripe) No idea why.
I'm wondering where the best place is to put new wire in and run it to something switched by the switch in the cab. Anyone know where a fuse/ relay that is switched is that I could pull power from?