- Joined
- Dec 8, 2009
- Messages
- 861
- Reaction score
- 2
- Points
- 0
- Location
- Evansville , IN.
- Vehicle Year
- 1997
- Make / Model
- Ford
- Engine Size
- 4.0 OHV
- Transmission
- Automatic
Figured I would post some pics and info as I go . Gotta have something to keep me motivated .
Couldn't find any 44 TTB's in the junk yards so I put a ad on Craigslist . This guy call and said he had a 80 F150 and a 83 Bronco . $75 a piece without the 3rd's but that's all I could find and he was willing to cut them out with a torch .
I know this doesn't look safe but we got both of them out and loaded in an hour .
Got a new Afco Racing 1.5" per 1' reamer off ebay .
Got started taking them apart . All the rotors are too thin to turn but I'm going to hopefully be able to press the hubs out .
Soaked everything down with PB Blaster.
Did I mention my wife loves the smell of PB Blaster and gear oil
If any body has any info or links about doing a 44 knuckle swap feel free to post them here .
Couldn't find any 44 TTB's in the junk yards so I put a ad on Craigslist . This guy call and said he had a 80 F150 and a 83 Bronco . $75 a piece without the 3rd's but that's all I could find and he was willing to cut them out with a torch .
I know this doesn't look safe but we got both of them out and loaded in an hour .
Got a new Afco Racing 1.5" per 1' reamer off ebay .
Got started taking them apart . All the rotors are too thin to turn but I'm going to hopefully be able to press the hubs out .
Soaked everything down with PB Blaster.
Did I mention my wife loves the smell of PB Blaster and gear oil
If any body has any info or links about doing a 44 knuckle swap feel free to post them here .