Hardwareman
New Member
- Joined
- Aug 7, 2007
- Messages
- 991
- Reaction score
- 0
- Points
- 0
- Location
- SoCal
- Vehicle Year
- 1995
- Make / Model
- Ford
- Transmission
- Manual
I'm working on my Ranger today. Putting on new rotors, pads, wheel bearings, radius arm bushings, etc.
When I removed the axle pivot bolts one of the axle pivot bushings was really chewed up! I ended up getting it off by pounding it out with a hammer. There's a metal sleeve inside and outside of the bushing.
Do I need to remove one or both of these sleeves? Thanks
Allen
When I removed the axle pivot bolts one of the axle pivot bushings was really chewed up! I ended up getting it off by pounding it out with a hammer. There's a metal sleeve inside and outside of the bushing.
Do I need to remove one or both of these sleeves? Thanks
Allen