Tom1993
New Member
- Joined
- Jun 3, 2008
- Messages
- 28
- Reaction score
- 0
- Points
- 0
- Location
- Hennigsdorf, Germany
- Vehicle Year
- 1993
- Make / Model
- Ford
- Engine Size
- 2,3L I4
- Transmission
- Manual
Well, It's gettin' hot here, and I tried to cool down the Ranger by pressing that A/C-Button. The red control-light turns on (near the Blower/AC switch) but nothing happens.
The engines usally drops a little down, then a little faster, when the Clutch on the compressor starts to work...
Nothing & No cold air.
I checked the Fuses, and checked the Compressor.
There is no power on the cable, as it seems... so, it's clear, the clutch won't work.
That's the End of my Idea's... is the Switch in the Dashboard broken ?
Is there a Relay ? (The Relay in the Power-Distibution-Box is Working) or any "circuit-breaker" for Low-Pressure ?
How to check ?
Thanks for any hint.
Greetings from Germany, Tom
(And sorry, if my english isn't the best...)
The engines usally drops a little down, then a little faster, when the Clutch on the compressor starts to work...
Nothing & No cold air.
I checked the Fuses, and checked the Compressor.
There is no power on the cable, as it seems... so, it's clear, the clutch won't work.
That's the End of my Idea's... is the Switch in the Dashboard broken ?
Is there a Relay ? (The Relay in the Power-Distibution-Box is Working) or any "circuit-breaker" for Low-Pressure ?
How to check ?
Thanks for any hint.
Greetings from Germany, Tom
(And sorry, if my english isn't the best...)