prerunner
New Member
- Joined
- Dec 23, 2009
- Messages
- 680
- Reaction score
- 3
- Points
- 0
- Location
- Surrey, BC
- Make / Model
- Blue oval!
- Engine Size
- 4.0, 4.0
- Transmission
- Automatic
The 93 Ranger is home finally. Been driving it a couple days now and can say it has potential. Not sure if I should start a thread about it or not. Could be an awkward project / daily beater.
Nice to be back in an RBV again.
A few fixes coming shortly as it had been badly beaten by the PO.
Edit: First fix is a simple polish of the headlights using "Blue Magic Headlight Lens Restorer." Lights look better already.
Have to replace a tail light (rt side) cause the lens is busted. Bought a pair of '03 tail lights to slightly update it. Pulled the tail lights out of my 92 Exploder parts truck and its a 2 bulb system too. Want to use the sploder single pigtail and bulb in place of the separate turn / brake pigtails on the Ranger. Shouldn't be too hard. Can't be much harder than using a trailer converter or drilling out the 2 bulb lens assemblies to 3 bulbs. Idk, if it was this easy maybe other guys would have done this too.
Nice to be back in an RBV again.
A few fixes coming shortly as it had been badly beaten by the PO.
Edit: First fix is a simple polish of the headlights using "Blue Magic Headlight Lens Restorer." Lights look better already.
Have to replace a tail light (rt side) cause the lens is busted. Bought a pair of '03 tail lights to slightly update it. Pulled the tail lights out of my 92 Exploder parts truck and its a 2 bulb system too. Want to use the sploder single pigtail and bulb in place of the separate turn / brake pigtails on the Ranger. Shouldn't be too hard. Can't be much harder than using a trailer converter or drilling out the 2 bulb lens assemblies to 3 bulbs. Idk, if it was this easy maybe other guys would have done this too.
Last edited: