radiator core replacment/ body lift

[kris97ranger]

im in the process of replacing the core support on my ranger and while i had it all apart id like to do a bodylift but i cant get the very front bolts to slide out they spin inside the bushing but wont come out. anybody kno how to get it out?
________
Zoloft withdraw

 

[sparkdic]

At this point you are more then likely going to have to cut the bolts. And since you are replacing the core support you can repair it better/easier when you have the old one off.

 

[kris97ranger]

alright so apparently ranger body mounts are waaay too complictaed i started by removing the top bolt through the rad support but it turns out the bolt going up from the bottom threads into a steel sleeve that spreads out kinda like a washer on top of the mount. i used a pipe wrech to hold it still and unbolted everything from underneath. also if u dont feel like doing way too much work i cut the bolts flush with the nut so im not undoing an inch of a half of unesaccary thread.
________
XexoticCarianeX cam

 

[strvger]

i just replaced all the body bushings as well when mine got the body lift. the old rubber ones were pretty well gone.