- Joined
- Feb 25, 2008
- Messages
- 694
- Reaction score
- 1
- Points
- 0
- Location
- Barrie, Ontario, Canada
- Vehicle Year
- 1997 , 1992
- Make / Model
- Ford , Ford
- Engine Size
- 7.3L , 4L
- Transmission
- Manual
Alright well heres my problem i did the rear disk swap on my 92 ranger i got full width D44 9" i put the chevy 1/2ton disk brakes on the rear, bled everything with the truck off its all good no air, pedal firms up just before half way.
But once i start the truck up a baby could push the brake pedal all the way to the floor no pressure what so ever. The master cylinder is under 6 months old. ive bled the system over an over but i still cant get any pressure at the pedal with the truck running. what could cause this?
But once i start the truck up a baby could push the brake pedal all the way to the floor no pressure what so ever. The master cylinder is under 6 months old. ive bled the system over an over but i still cant get any pressure at the pedal with the truck running. what could cause this?