Viper Command
New Member
- Joined
- Mar 1, 2008
- Messages
- 665
- Reaction score
- 6
- Points
- 0
- Location
- Crestline CA.
- Vehicle Year
- 2x'97-'88-'98-'
- Make / Model
- Ranger,Ranger,
- Engine Size
- 3.0,4.0OHV 2.9, 4.6DOHC, 4.0SOHC
Its a 1997 ranger xl, 3.slow, 4R44E auto, 4X4, BW1354E, single cab, short bed
Well it was a san diego gas and electric utilty repair truck......
My mod list.
Front 4" lift kit with added spacers ( 7" total )
Rear stock block, explorer leaf packs, bell tech shackles ( 6 1/2" )
Hand made front sway bar disconnects
Stainless brake lines all around
Sloted and cross drilled rotors and EBC pads
All breather tubes spiral looped at the top of the bed
Customized T-rex billet grille
Clear chrome head lights and side markers
2 KC lights in the grille w/ 50w HID 8000k
Hand made diamond plate bumper
E-fan with hand made shroud
Modfied Volant cold air BOX
Hand made snorkel w/ Volant scoop
Hand made hood lifters
Modfied amp steps on frame
Hand made electric flip up roof lights w/ 6" KC and 50w HID 8000k
High bolster racing seats
Explorer center console
Cobra 19 cb/pa w/ 5' wilson whip
350w ac inverter in passenger air bag cover
Hand made diamond plate gauge faces w/ alu. bezel
Sony, RF, Boston acustic, pioneer sound system
Hand made 3" exhaust stack w/ gibson muffler
48" hi-lift jack in bed
33x12.5 Goodyear duratrak wrangler tires
15x10 alcoa knock off wheels
Ford 7.5 trac-lok
4R55E upgrades
And the most important mod of all... TRS windshield banner
Hand made means I had made it.
Comming soon, bigger motor, tires and axles
The years of offroading....
Build pictures
Im doing SAS with d60's 38" super swampers
The work shop and the truck......
The front axle and tires......
opening the wheelwells for a low slung stance.....
Here is the d60 rear end.....
Rear end stabbed in...
mock up for the front d60
Well it was a san diego gas and electric utilty repair truck......
My mod list.
Front 4" lift kit with added spacers ( 7" total )
Rear stock block, explorer leaf packs, bell tech shackles ( 6 1/2" )
Hand made front sway bar disconnects
Stainless brake lines all around
Sloted and cross drilled rotors and EBC pads
All breather tubes spiral looped at the top of the bed
Customized T-rex billet grille
Clear chrome head lights and side markers
2 KC lights in the grille w/ 50w HID 8000k
Hand made diamond plate bumper
E-fan with hand made shroud
Modfied Volant cold air BOX
Hand made snorkel w/ Volant scoop
Hand made hood lifters
Modfied amp steps on frame
Hand made electric flip up roof lights w/ 6" KC and 50w HID 8000k
High bolster racing seats
Explorer center console
Cobra 19 cb/pa w/ 5' wilson whip
350w ac inverter in passenger air bag cover
Hand made diamond plate gauge faces w/ alu. bezel
Sony, RF, Boston acustic, pioneer sound system
Hand made 3" exhaust stack w/ gibson muffler
48" hi-lift jack in bed
33x12.5 Goodyear duratrak wrangler tires
15x10 alcoa knock off wheels
Ford 7.5 trac-lok
4R55E upgrades
And the most important mod of all... TRS windshield banner
Hand made means I had made it.
Comming soon, bigger motor, tires and axles
The years of offroading....
Build pictures
Im doing SAS with d60's 38" super swampers
The work shop and the truck......
The front axle and tires......
opening the wheelwells for a low slung stance.....
Here is the d60 rear end.....
Rear end stabbed in...
mock up for the front d60
Last edited: