Targis34
New Member
- Joined
- Sep 1, 2010
- Messages
- 12
- Reaction score
- 0
- Points
- 0
- Vehicle Year
-
2007
1998
- Make / Model
-
Ranger
Mazda
- Engine Size
- 3.0 ltr
- Transmission
- Manual
I don't usually ask..I mostly read but i'm stumped and I need my truck back so here goes.
I swapped the 3.0l in my 2007 ranger for an engine out of a 2003. I swapped all the sensors (to the best of my recollection) except for the fuel injectors. I am now getting the P2196 and 98 codes. I drives real nice for a while then seems to run rough and throws the codes. I originally thought it was just bank 1 but now realize its both sides. I have the old injectors to use but i'd like some direction before changing them. They are "supposed to be the same" Any help would be appreciated
I swapped the 3.0l in my 2007 ranger for an engine out of a 2003. I swapped all the sensors (to the best of my recollection) except for the fuel injectors. I am now getting the P2196 and 98 codes. I drives real nice for a while then seems to run rough and throws the codes. I originally thought it was just bank 1 but now realize its both sides. I have the old injectors to use but i'd like some direction before changing them. They are "supposed to be the same" Any help would be appreciated