simplynewt
New Member
- Joined
- Mar 21, 2015
- Messages
- 2
- Reaction score
- 0
- Points
- 0
I have an issue with my Right Front Tire in that it is wearing bad on the inside
I looked for worn ball joints as Instructed due to the fact I can move the tire top to bottom slightly. No evidence of ball joint wear although the boots are gone.
Once I took the tire off, I seen extreme wear on the pads. So much so that I have to replace the rotors. The OE is Motorcraft BRR204. Can I upgrade to a Drilled Rotor with Ceramic Pads or do I have to stay with the OE part?
Thanks for any advice given to me.
Simply Newt
I looked for worn ball joints as Instructed due to the fact I can move the tire top to bottom slightly. No evidence of ball joint wear although the boots are gone.
Once I took the tire off, I seen extreme wear on the pads. So much so that I have to replace the rotors. The OE is Motorcraft BRR204. Can I upgrade to a Drilled Rotor with Ceramic Pads or do I have to stay with the OE part?
Thanks for any advice given to me.
Simply Newt