bobbywalter
TRS Technical Staff
TRS Event Staff
V8 Engine Swap
TRS Technical Advisor
TRS Banner 2012-2015
TRS 20th Anniversary
Ugly Truck of Month
TRS Event Participant
- Joined
- Aug 9, 2007
- Messages
- 23,502
- Reaction score
- 4,698
- Points
- 113
- Location
- woodhaven mi
- Vehicle Year
- 1988
- Make / Model
- FORD mostly
- Engine Type
- V8
- Engine Size
- BIGGER
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
- Total Lift
- sawzall?
- Tire Size
- 33-44
- My credo
- it is easier to fix and understand than "her"
wasnt keeping up.
you can use a spray bottle and squirt water around the injectors and intake mating surfaces and listen for hissing and monitor stumble.
seems like vacuum leaks were the issue.
it can be really difficult to install the injectors and rails without janking up the seals.... i always do the soapy bottle spray right away and a week or so later after it heat cycles to make sure there are no vacuum leaks.
it can get frustrating.
you can use a spray bottle and squirt water around the injectors and intake mating surfaces and listen for hissing and monitor stumble.
seems like vacuum leaks were the issue.
it can be really difficult to install the injectors and rails without janking up the seals.... i always do the soapy bottle spray right away and a week or so later after it heat cycles to make sure there are no vacuum leaks.
it can get frustrating.