INFO 1986 ranger 2.9

[Chad302]

I have a 1986 ford ranger with a 2.9 5 speed 4x4 that hesitates while idling it will idle fine that almost stall out. When I drive it it hesitates and jerks. I have replaced every sensor and fuel injectors on the truck. My scanner says I have a code p1035
FOXWELL


P1035


Cylinder 3 fuel injector heater circuit high


1/1


OBDII/EOBD

 

[RobbieD]

An '86 is OBDI, not OBDII, and it'll have 3-digit codes, not 4-digit.

Can you get an OBDI code reader to put on it?

 

[Chad302]

I haven’t looked really that hard for one I bought an adapter from obd2 to obd1 I’ll see if I can find one

 

[Chad302]

Just bought one on Amazon

 

[JohnG]

The codes so you don't have to go searching:
https://www.therangerstation.com/tech/obd-i-diagnostic-trouble-code-dtc-applications-2-digit-ford-codes/
https://www.therangerstation.com/tech/obd-i-diagnostic-trouble-code-dtc-applications-ford-3-digit-codes/

 

[rusty ol ranger]

An 86 2.9 will throw a 2 digit code.

 

[Chad302]

The codes so you don't have to go searching:
https://www.therangerstation.com/tech/obd-i-diagnostic-trouble-code-dtc-applications-2-digit-ford-codes/
https://www.therangerstation.com/tech/obd-i-diagnostic-trouble-code-dtc-applications-ford-3-digit-codes/

Thank you!

 

[Chad302]

Well I scanned my truck code 18 67 63 and 22

 

[Chad302]

going to replace the pickup coil I’ve replace everything else

 

[Chad302]

Thanks for the help

 

[bcschief]

If you're changing the distributor pick up, you may want to replace the module also if you do get the Motocraft one Rock Auto has them the cheapest DY1284 and there $63.79 which is about half of what everyone else wants.

 

[Chad302]

Thank you!