64-Inch Chevy Leaf Swap W/ 6" Skyjacker Kit

[guzzirider]

I have a 93 4X4 XLT X-Cab Ranger, I am getting the Skyjacker Class II 6-inch suspension kit with out the rear leaf springs.

And I won’t the truck to sit close to level. If the ass sits ½ to 1” lower that the front that is ok.

The truck will sit on 33” Pro Comp Tires Xterrain I got used for now.

Now if I do the 64-Inch Chevy Leaf Swap w/ Belltech 6400 shackles, what would I have to de to make it sit close to level?

I am using http://therangerstation.com/tech_library/64-inch_leaf.html for reference.

 

[Sasquatch_Ryda]

I am running a 6" skyjacker coils on my 91 supercab (nets about 5" of lift with my spacers under the coils) with the 63" chevy springs and an extended shackle and it sits level.

 

[PlumCrazy]

I am running a 6" skyjacker coils on my 91 supercab (nets about 5" of lift with my spacers under the coils) with the 63" chevy springs and an extended shackle and it sits level.

On my 95 I am running 4" coils with 2" spacers up front and Chevy leafs w/ ext. shackle and the stock block. The back sits about 1" higher than the front.

(those are 33's too)

 

[guzzirider]

Wall your truck look cool! I think it will be a kick !@# set up for my Truck! THX

 

[Sasquatch_Ryda]

Forgot to mention that I am also running the stock block, and no overload in the leaf pack.

 

[guzzirider]

Sasquatch_Ryda

Thank you, I wish you lived closer to me!!! to help me put all this stuff on! LOL