- Joined
- Nov 12, 2018
- Messages
- 1,250
- Reaction score
- 513
- Points
- 113
- Location
- Alcoa, TN
- Engine Type
- 2.8 V6
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
Hi all,
I'm wanting to replace the u joints in my rear drive shaft. My BII has the axle with the double cardan that comes out of the transfer case.
So that means I'll need 3 u joints plus the spring kit to do the whole drive shaft right?
Are they all the same size u joint? I see a bunch of u joints listed on Rock Auto...... just want to be sure to get the correct ones.
Looks like dana/Spicer are the best replacements from what I've read.
I did find this write up. What I assume I'll have to do.
I've never done u joints before, but think I can manage.
I'm wanting to replace the u joints in my rear drive shaft. My BII has the axle with the double cardan that comes out of the transfer case.
So that means I'll need 3 u joints plus the spring kit to do the whole drive shaft right?
Are they all the same size u joint? I see a bunch of u joints listed on Rock Auto...... just want to be sure to get the correct ones.
Looks like dana/Spicer are the best replacements from what I've read.
I did find this write up. What I assume I'll have to do.
TRS Magazine - Double Carden Joint Replacement
therangerstation.com
I've never done u joints before, but think I can manage.
Last edited: