- Joined
- Aug 23, 2015
- Messages
- 389
- Reaction score
- 87
- Points
- 28
- Location
- Virginia
- Vehicle Year
- 1988
- Make / Model
- Ford
- Engine Type
- 2.9 V6
- Engine Size
- 2.9
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
- Total Lift
- 0
- Total Drop
- 0
- Tire Size
- 235/75/15
I have been doing a lot of work on this 88 bronco 2 that I inherited. It has not started since in my possession, or for the past 10 years. I pulled #1 plug to TDC and ran the crank pulley the rest of the way to 10 BTDC. I marked the dizzy and made sure they rotor was pointing to #1 plug wire, installed the cap and wires in correct firing order; 1,4,2,5,3,6. I have fuel at the rail but no spark and it will not start. Any suggestions of things to check? Thanks!