88 Ranger Front end issues 🙃🙃✌️ NEED HELP!

[Buzzard]

Soo I got this fine piece of Ford Craftsmanship

I’m the 2nd official owner and I’ve had her for 5 years.

This is my…

1988 Ford Ranger XLT 4x4, (SuperCab) w/t a 2.9l V6, Manual Transmission, She also has a
4in Rough Country Suspension Lift
**Original build date on door (11/87)**

Her Name is Vegas.
So my driver side wheel is straight as an arrow but my passenger sidewheel is kicked out at the bottom and falls in at the top does anyone have tips or help also I’ve got new camber sprockets or bushings whatever ya call them lol, how hard are they to install???

 

[ericbphoto]

Congratulations on getting the truck. Difficulty of steering and suspension work depends on the level of rust and decay on the truck. It's not complicated , though. For starters, try reading through this article in our tech library. Before doing alignment, though, make sure ball joints and tie rod ends are in good condition. If they are worn and sloppy, any and all alignment efforts are futile.

Steering Tech - Discussing TTB Steering and Alignment - The Ranger Station

How it’s supposed to work (and why it often doesn’t work like so) Steering continues to be one of the most overlooked, often misunderstood pitfalls on these suspensions, so I felt this subject deserves it’s very own page. As … Continued

www.therangerstation.com

 

[bobbywalter]

Best rangers ever made....I might be a bit biased...