- Joined
- Mar 26, 2019
- Messages
- 17
- Reaction score
- 7
- Points
- 3
- Location
- Central Texas
- Vehicle Year
- '96
- Make / Model
- Ford Ranger XLT
- Engine Type
- 2.3 (4 Cylinder)
- Transmission
- Manual
- 2WD / 4WD
- 2WD
- My credo
- Where there's a Wolf, there's a way...
In the process of stripping out an old audiovox alarm. I ran across a harness that had been tapped in the cab to the left of the steering column. I'm trying to restore it to factory connections. It has 4 wires a red, a black, white/black stripe, and an Orange. The black and the orange were both cut and routed to the alarm. I assume the red and black both go back to the fuse block and the orange and white/black go to an adjacent harness.
The harness is disconnected in the pic but you can see the wire colors clearly. Any help is appreciated. I have no idea what these do, yet. So I don't want to reconnect them by mistake.
The harness is disconnected in the pic but you can see the wire colors clearly. Any help is appreciated. I have no idea what these do, yet. So I don't want to reconnect them by mistake.
Attachments
-
96.8 KB Views: 137