Chevelle Kid
New Member
- Joined
- Feb 28, 2008
- Messages
- 610
- Reaction score
- 6
- Points
- 0
- Age
- 32
- Location
- Long Island
- Vehicle Year
- 1994
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Manual
Ok, so I have a 1979 F-250 Parts truck that has a D-44/D-60 combo. I wanna cannibalize the D-44 and put it under my Bronco II for reasons of it's FREE. I Have a 9" that's going in the rear and I'd like to have the 5-5.5 lug pattern all around. As you may know the D-44 from the F-250 is 8 lug, can I use 5 lug knuckes on this axle? Are the parts specific to these axles or are they just a regular D-44 with 8 lug outers?
I'm going to be narrowing it to EB width and using those axles if it's not too much hassle (the axleshafts are my main concern, having customs made will kill the idea)
I have not torn into this axle yet and I know NOTHING about it other than it's there for the taking and it's a D-44 with 8 lug...LOL
Thanks for any input!
Ben
I'm going to be narrowing it to EB width and using those axles if it's not too much hassle (the axleshafts are my main concern, having customs made will kill the idea)
I have not torn into this axle yet and I know NOTHING about it other than it's there for the taking and it's a D-44 with 8 lug...LOL
Thanks for any input!
Ben