DirtBronco
Member
- Joined
- Jul 28, 2020
- Messages
- 67
- Reaction score
- 25
- Points
- 18
- Location
- Georgia
- Vehicle Year
- 1989
- Make / Model
- Bronco II
Is it normal to have the e-selector button tray on the dash in tandem with a manual transfer case lever?
The buttons are blank, no 4x4/Low written on them, but there's have a noticeable click when I press them.
From what I've seen on junkyard Rangers, there's usually a fake vent that goes there.
There's also no feeling in the shift when I move the lever and the 4WD does not engage.
Additional info, I've got manual hubs, FM146, and a non-functioning speedometer.
It does not appear to be the dummy case.
The buttons are blank, no 4x4/Low written on them, but there's have a noticeable click when I press them.
From what I've seen on junkyard Rangers, there's usually a fake vent that goes there.
There's also no feeling in the shift when I move the lever and the 4WD does not engage.
Additional info, I've got manual hubs, FM146, and a non-functioning speedometer.
It does not appear to be the dummy case.