Dana 30 SAS Guy need your help

[Downey]

Im trying to figure out the best way mount the radius arm style arms to the frame.

so question is how did you guys mount the arms?

what did you make your cross member/ arm mount out of?

pictures would be great

thank you

 

[railman]

as seen in most threads, use 3/16" minimum...preferably 1/4" steel to make brackets to bolt to the frame at the stock tranny crossmember location....use 2" square tube (again 1/4" wall would be best) to make a new crossmember...

hope this helps ya

l8r, John

 

[Downey]

yea i have seen a couple different designs but was hoping for some pictures

 

[Downey]

no one?

 

[86MUDRCJ]

Here's one that he made his own arms. There's pics in there somewhere but you'll just have to skim through. I know there is a couple more people that have done it just can't find the threads.

Here's the link:
http://www.therangerstation.com/forums/showthread.php?t=125972

 

[4.0B2]

transmission crossmember with RA mounts


if you were to do a 3-link or y-link radius arm... you could do the same.



of course, your arms will probably look more like this: