Geeshik
New Member
- Joined
- Aug 7, 2007
- Messages
- 134
- Reaction score
- 0
- Points
- 0
- Location
- Sheboygan Falls, WI
- Vehicle Year
- 1993
- Make / Model
- Ford
- Engine Size
- 3.0
- Transmission
- Manual
This is what i have. i have the intake manifold back on my truck now, and i have the valve covers off. i'm sure i could figure this out myself with some time, but i think it would be easier if someone could share their technical knowledge with me. i think the distributor is in the right position now, but i'm not sure.
The engine is at TDC, but i'm not sure of exhaust and intake TDC. i installed the distributor aligned with the mark from the cap facing the mark i made on the distributor housing. i rotate the engine and try to see if the intake valves are opening in an order according to 142536, but i'm not sure on this though. It seems like six opens on the one position when it comes back around. What am i missing?
The engine is at TDC, but i'm not sure of exhaust and intake TDC. i installed the distributor aligned with the mark from the cap facing the mark i made on the distributor housing. i rotate the engine and try to see if the intake valves are opening in an order according to 142536, but i'm not sure on this though. It seems like six opens on the one position when it comes back around. What am i missing?