planeflyer21
Member
- Joined
- Nov 26, 2013
- Messages
- 192
- Reaction score
- 19
- Points
- 18
- Location
- Sonoran Desert
- Vehicle Year
- 1999
- Make / Model
- Ford
- Engine Size
- 3.0
- Transmission
- Manual
So looking at installing the Explorer live spindle on my '99 Range 4x4.
I know what the steps are in the sticky link here: http://www.therangerstation.com/tech_library/99hubswap.shtml
My question is this: after removing the wheel and hanging the caliper, would it be possible to remove the hub bolts and pull them out with the axle portion as an assembly? And install the Explorer parts in a similar assembled way?
Thanks for any input!
Jon
I know what the steps are in the sticky link here: http://www.therangerstation.com/tech_library/99hubswap.shtml
My question is this: after removing the wheel and hanging the caliper, would it be possible to remove the hub bolts and pull them out with the axle portion as an assembly? And install the Explorer parts in a similar assembled way?
Thanks for any input!
Jon