extended brake line questions

[SchmigShady]

ok i was finishing up a few things from installing my lift kit and i got the

Raybestos: BH 38622, BH 38623
and on the driverside do i need a brake line tee since there is 2 brake lines there and the new lines only have it for one brake line. thanks

 

[SchmigShady]

never mind i ended up jerry rigging a tee togther. i'm just glad i'm finaly done with my lift

 

[dhinch279]

can you get a picture of the "T" that you rigged together, or explain what you did, because I am in the same boat as you

 

[SchmigShady]

well i simply went to the parts store to get a 3/16 brake line tee. they didnt have any for 3/16 just bigger and they had fitting to reduce it down to 3/16. i can get a picture but might have to wait till this weekend since i already went mudding and hadnt cleaned it yet so it caked with mud right now.

 

[dhinch279]

ok well I found a picture that another member on here had done a couple of years ago, so thats what I will have to do. Thanks for the input

 

[SchmigShady]

also i forgot to add that i had to run a short very short brake line from the rubber line to the tee. i have a double flaring tool so it was easy for me you might have to do the same cause i dont think they sell brake lines that short. mines was under 4 inchs long.