Finally My Lift Is Done

[Ranger_Boi]

it took a wile to get here but its done. i pruchased the tuff country 4in suspension kit and man it was a bitch to get on but now it looks great.. u be the judge. THE REAR IS LOWER because i had to take my overloads off so my liefs are a little ware there being re-arched as we speak


HERES THE STOCK PIC

HERES THE LIFT

AND HERES THE FINISHED PRODUCT

 

[compleckz]

looks great!

 

[mkpecor]

looks good man, did you get the extended radius arms with that kit.

 

[Ranger_Boi]

yah they were a bitch we had to cut the rivits and then put the new braket with bolts above it

 

[86freebie]

just saw this on one of the power block (spike tv) shows. they said the easiest way is cut a t in the top of the rivet with a 4" grinder then air chisel with the little auto chisel from sears or where ever. I KNOW HIND SIGHT IS 20/20

 

[Ranger_Boi]

lol yup thats basically what i had to do lol

 

[86ford]

its not that bad doing to brackets for a lift. leaf spring hangers usually are much worse. i took care of all my rivet grinding for my factory radius arm brackets and passanger beam in about 3-4 hrs. but i am well versed in the rivet grinding fun.

86

 

[mhughes165]

its not that bad doing to brackets for a lift. leaf spring hangers usually are much worse. i took care of all my rivet grinding for my factory radius arm brackets and passanger beam in about 3-4 hrs. but i am well versed in the rivet grinding fun.

86

they really should only take a minute or two a side if u have done them before

 

[09ajmaros]

wish i had an older model like that just to lift it b/c it would be hard to make a lift with the newer a- arm set up