- Joined
- Dec 3, 2016
- Messages
- 221
- Reaction score
- 26
- Points
- 28
- Location
- riverview, fl
- Vehicle Year
- 1988
- Make / Model
- ranger xlt
- Engine Type
- 2.9 V6
- Engine Size
- , 2.9
- Transmission
- Automatic
- 2WD / 4WD
- 2WD
- Total Lift
- none but it is a convertible
- Tire Size
- stock
i have found a 4x4 with an F4 axle code on the door. the seller says the rear was welded at some point but he broke the welds and replaced the guts. as he seems to be low budget, i imagine he used whatever he could find.
i only need 1 posi for my 2wd but have been told that sometimes the front wasn't. is this so? knowing nothing about 4wd, it just seems to me if the rear is posi, the front should be too.
i think that welding the axle was a common low-bucks way to act like it was a locker. what was actually welded?
i only need 1 posi for my 2wd but have been told that sometimes the front wasn't. is this so? knowing nothing about 4wd, it just seems to me if the rear is posi, the front should be too.
i think that welding the axle was a common low-bucks way to act like it was a locker. what was actually welded?