Help!

[Buckmaster J]

Can I take the parts out of a 1966 bronco dana 30 and put them in a 1985 jeep dana 30 (axle's,ring and pinion,carrier,bearings). Also will a 9 inch out of the same ford bolt up to the jeep or will I have to move spring pads.

 

[yyc_tbird_sc]

I don't think that Bronco's had a Dana 30...only the Dana 44. But I could be mistaken...

 

[Endoverend47]

they had the d30 from like 66-73or74 then the d44 from like 74-77 not to sure on years because this is from memory. and the 44s are actualy kinda rare.
and no i dont think that a bronco 30 and jeep 30 are the same. because i know the knuckles dont work

 

[1badexplorer]

EB used a d30 from 66-70. No I don't think you can swap the ring & pinion. D30 pinions come in several different lengths. I tryed swapping a pinion from a Grand Cherokee D30 to a TJ D30 and it wouldn't work either.