M50D for 4L ohv bolt pattern?

[livetoride21]

I'm wondering if anyone on here has a dimension drawing of a m50D for 2.8/2.9/4L bolt pattern? including the location of input shaft. I'm planning on making an adapter plate for an unconventional engine swap, so if anyone has a CAD drawing by some chance, or know where I could find one it would really help me out! I've searched far and wide and can't seem to find anything.

 

[adsm08]

I do not have the dimensions, but I do have a Cologne transmission out and on the floor right now. If you can wait a day or two I can get some high res photos with a ruler/yard stick for dimension comparison.

 

[snoranger]

Talk to Chad (Rulebreaker)... He built adapters to mate a np435 to a 4.0l years ago. He may have exact dimensions.

 

[livetoride21]

I do not have the dimensions, but I do have a Cologne transmission out and on the floor right now. If you can wait a day or two I can get some high res photos with a ruler/yard stick for dimension comparison.

Thanks for the reply! I actually have a 4L transmission I can measure to a moderately accurate extent. But I just don't have access to a precision measurement device like a CMM right now, so was just trying to skip the measuring process all together. Thanks anyways though!

 

[livetoride21]

Talk to Chad (Rulebreaker)... He built adapters to mate a np435 to a 4.0l years ago. He may have exact dimensions.

thanks I'll contact him and see!