No spark

[JoeHa]

2097 Ranger need help out of breath

 

[gungfudan]

2097 Ranger need help out of breath

We need more info. No spark what year ranger and what size engine?

 

[RonD]

+1 ^^^

Welcome to the forum

On any engine with a No Start condition...........do 50/50 test
Spray fuel into the intake, manually, then try to start

If it starts and dies you have a fuel delivery problem

If it doesn't start/fire then you have a spark OR compression problem

No way to reliably test spark on most Fords after 1990, they used Waste spark system so spark tester will show no spark most of the time

 

[JoeHa]

2097 Ranger need help out of breath

2007 3.2 four cylinders. I changed ECM CAM SENSOR PLUGS WIRES COIL PACK. now I not sure what is left going to change the coil one more time tomorrow morning.

 

[Bill]

Your biggest problem here is you are randomly replacing parts instead of diagnosing the cause. Rather than replacing things, check for spark, fuel (with a fuel pressure gauge), get an ohmmeter for checking voltages at the sensors and resistance across the sensors.

 

[rusty ol ranger]

A 2007 3.2L 4cylinder?

Im assuming this isnt in the US.

Do they have OBD II wherever your at?

If so first thing i would do is get a scan tool and pull the codes.

 

[Dirtman]

Considering the 3.2 would be a diesel, not having spark would be a good thing.

 

[rusty ol ranger]

Considering the 3.2 would be a diesel, not having spark would be a good thing.

Im not up on overseas stuff.

 

[RonD]

LOL

He has a 2.3l DOHC Duratec engine in a 2007 Ranger, gasoline powered
Just bad typing

 

[rusty ol ranger]

Oh, shit, ok that makes way more sense. Lol