RaceRangers Build

[RaceRanger97]

you beat me too it i was about to just put up that pic we took of you at the dyke jump. we have lots more to come. i belive even have a continous shot of you off the dyke jump from sunday

Lol awesome! I sent you guys a message early about getting some. Was wondering what kind of pics you guys got and how many. I would like to take advantage of the package deal.

 

[RaceRanger97]

Little vid.

http://www.youtube.com/watch?v=yelF_ZtjqPs

 

[RaceRanger97]

 

[dhkonrad]

uh oh, going bigger? Getting supercharged? oh the possibilities!!!

 

[RaceRanger97]

Rebuilding it basically with a few go fast parts.

Also, I decided that leads are for trees.

And I bought a bundle of badass tires.

 

[2004xlmiller]

leafs are for trees haha awesome, cant wait to see this thing linked.

 

[RaceRanger97]

Bunch of bad bearings.. Looking for a roller short block.

 

[-Nathan-]

what was your oil pressure at?

 

[RaceRanger97]

what was your oil pressure at?

Loowwww

Got another motor. Torn almost all the way down, looks much better so far.

 

[RaceRanger97]

Some random race pics

 

[Carson]

you should look into putting on a hi capacity oil pan, 302's dont hold enough oil in the stock pan, so when your keep it over 5000 rpm for more than 30 seconds-1min all the oil gets pumped to the top end and cant drain back fast enough so it starves the mains of oil.

 

[alwaysFlOoReD]

you should look into putting on a hi capacity oil pan, 302's dont hold enough oil in the stock pan, so when your keep it over 5000 rpm for more than 30 seconds-1min all the oil gets pumped to the top end and cant drain back fast enough so it starves the mains of oil.

If that's the case, wouldn't it be better to fix the drain back problem? Especially as the engine is apart? Is there any place you can link to that would give more info, such as how and where to enlarge drain-back holes.

Richard

 

[RaceRanger97]

I am going to a bigger pan.. Also when I build my next motor I will assist the drain back by running a line from the back of the head directly to the pan.

 

[kris97ranger]

I cant remember the name but theres also a coating you can do inside the block that lets oil drain back faste

 

[RaceRanger97]

Cleaned up some parts today