- Joined
- Dec 21, 2021
- Messages
- 155
- Reaction score
- 124
- Points
- 43
- Location
- Central Florida
- Vehicle Year
- 2010
- Make / Model
- Ford Ranger
- Engine Type
- 4.0 V6
- Engine Size
- 4.0L
- Transmission
- Automatic
- 2WD / 4WD
- 2WD
- Total Drop
- 4, 5
- Tire Size
- 235,55,17
Good afternoon all, had a question about the rear leaf springs in regards to the ranger lean. I was going to lower my truck 4/5 with the DJM kit, and right now I have the DJM rear leaf spring hangers. My idea was maybe I could run no hanger on the right side for a 5 inch lower, and the DJM hanger on the left side set at 4 inches to cancel out the ranger lean. I was thinking about leaf spring blocks but those don't really work on flip kitted trucks. And then in the front I'd just use a washer. Is this a good idea or dangerous? Thanks