Kenobi77
New Member
- Joined
- Jun 5, 2021
- Messages
- 7
- Reaction score
- 2
- Points
- 3
- Location
- USA
- Vehicle Year
- 1986
- Make / Model
- Ford Ranger
- Engine Type
- 2.9 V6
Long story short: my rear window seal has given up the ghost. The glass in there now is an aftermarket slider, so if it's like my dad's 6th gen F-series, I would assume I use the stationary seal for it (please correct me if I'm wrong).
Going off that, I've been able to find the plain stationary seal no problem--but I've got the chrome "reveal" trim and can't find it for the life of me. Anyone got a lead on it? Junkyards 'round here never have them, so that's a no-go.
If it's not reproduced--I see the '80-86 F-Series seal is ~30 inches longer; would chopping it down be a viable option (albeit a last resort)?
The joys of having limited aftermarket support...
Going off that, I've been able to find the plain stationary seal no problem--but I've got the chrome "reveal" trim and can't find it for the life of me. Anyone got a lead on it? Junkyards 'round here never have them, so that's a no-go.
If it's not reproduced--I see the '80-86 F-Series seal is ~30 inches longer; would chopping it down be a viable option (albeit a last resort)?
The joys of having limited aftermarket support...