King Crush
New Member
- Joined
- Aug 14, 2007
- Messages
- 89
- Reaction score
- 0
- Points
- 0
- Age
- 38
- Vehicle Year
- 1993
- Make / Model
- Ford
- Transmission
- Manual
So I got a '93 Ranger that I only had for about a month now. I been bustin' my a$$ to put this Skyjacker 6'' class 2 on it. Well I need to get the damn pitman arm off. I went to Napa and bought a puller for it, and that was like $40. I got the puller on it. Got it has tight as I could, even used a cheater bar to get it on there a little tighter. The only prob is the diff is in the way, so I can't get a real good full swing at it. I soaked it in WD-40 and that didn't help any. I allready got the shocks, coils, sway bar linkages, and the axle all put together, so I don't wanna have to take all that off to drop the axle to make som eroom so I can get a good awing on it. I'm thinking of using an impact and hammering that puller down, but afraid I might destroy the gear box or break the puller.