Stiff ride

[mulishiaranger]

On my ranger, i cranked the t-bars a bit. Now it rides stiffer, but not too bad... but i might want to replace the shocks with softer ones? Does anyone know what the valving is on these shocks is? And what might be a good replacement?

 

[Earl43P]

My solution was to crank them back down some.

My front shocks/suspension was "topping out" and I didn't like the ride.

I installed KYB Monomax's at the same time (I did LBJs, UCAs, shocks, brakes, OTRs and steering rack). I like the KYBs much better since readjusting the Tbars back down some.

 

[jasongind]

I had to lower the t bar bolt some as well. It still sits just about level but the ride is much better then at full crank, Im two turns out from full now.

 

[mulishiaranger]

Yeah mine aren't fully cranked either, i did my wheel bearings, now it's time for some balljoints and shocks i think... i wish lift kits existed for these trucks... well i wish they were affordable.