- Joined
- Aug 8, 2007
- Messages
- 362
- Reaction score
- 4
- Points
- 18
- Age
- 58
- Location
- Shawnee, Oklahoma
- Vehicle Year
- 1989
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Manual
So I have been thinking that I would like to go from my 33's to some 35's or maybe even 37's so I got to thinking how I could do it. I currently was running 33's with only cut fenders and 1/2" coil spacers. I work part-time at O'Reilly's so I began researching the Moog coil spring catalog and determined that the springs from a 66-76 F-150 (CC810) would give me the lift I was looking for so I ordered them. I also ordered the new James Duff coil buckets at this time too. Once everything was received I discovered that the new coils were to big for the coil seats so I purchased the HD coil seats for the 66-76 Bronco from JD. When I received them I discovered that they would have to be modified if I planned to use them. I notched them to fit around the beams and had a friend weld the edges and had to drill the center to bolt to the beam. I currently only have the passenger side complete so that is why it's titled Teaser. Once everything is finished I will measure for shocks and then get it on the road and trail to see how everything works. Enjoy the photos for now.