95dangerranger1
New Member
- Joined
- Jun 2, 2018
- Messages
- 5
- Reaction score
- 0
- Points
- 0
- Location
- MI
- Vehicle Year
- 1995
- Make / Model
- Ford
- Transmission
- Automatic
So, the passenger side window doesn't work on my 95 ranger, but I had power at the switch and motor connector of 12.4-12.5 volts. Logical conclusion is the window motor failed. Bought a replacement and installed it. The window STILL doesn't go down. Re-checked the voltages, which haven't changed. Had a friend push the passenger side window switch up, and had 1 with power, one without power. Push switch in the opposite direction and the one that had power no longer does, and the 1 that didn't now does. As far as I can tell, everything is checking out, but window doesn't go down. When I take the new motor and plug it into the driver's side connector, it goes up and down as it should. Any ideas, or has someone seen this before?
Last edited: