1987 ford ranger 4x4 camber issues, i need help!!!

[91rangerbaby]

My buddy just picked up a 1987 ford ranger 4x4, has the d28. The previous owner did a 4 inch rc lift. The truck has bad positive camber and we can't find anything online on how to fix it, we thought the coils just needed broken in but we've drove it alot and it's still very bad, it looks like it has the aftermarket caster nuts already installed. Has anyone had this issue and figured out the cure? Running out of options. Thanks

 

[Curious Hound]

First off, I would recommend readung tjis tech article 4 or 5 times until you understand it. The TTB axle is actually pretty easy to align, once you undetstand what's going on.

Second, please post some pictures showing the suspension and steering components in such a way that we could verify that the lift was done properly. Pictures of the axle beam drop brackets, the coils, especially the bottom seats, overall picture from the front so we can see how all the geometry looks. Then we'll figure out where to go next.