Recent content by D.T.Starr

I haven't posted many pics since I built the truck so here are a few with videos http://www.youtube.com/watch?v=k4M75NiKJVQ http://www.youtube.com/watch?v=4erv3YYbbZw http://www.youtube.com/watch?v=O57V2de_KGA http://www.youtube.com/watch?v=-Hh97fFPSw8...

I have a most of 1994 explorer, several BW 1354 t-cases, rads and other things I want gone by the winter, let me know if anyone wants something. I also have a BW 1350 manual case but I would want something for that. Only rear is a ranger 28 spline. Located outside of Orangeville Ontario.

Here are some picures of my shakedown run at Phil's this September.

Does anyone know how the wiper speed is regulated on a 1990 ranger? I have removed all the stock wiring harness from the truck and want to wire in high and low speed with a 3-way toggle. I tested the four wires going to the wiper motor. By grounding the white wire and sending 12V to the...

What are you opinions on the best camshaft for my 5.0L? I am now forced to tear into the top end of the engine so I may swap the cam as well. The engine is a stock 1992 mustang HO with Edelbrock upper and lower EFI intake, custom long tube headers 1.5” primaries to 2.5” exhaust (no crossover...

I am thinking about buying a 1997 AWD Ford explorer with the 5.0L V8, but I would only want if I can eliminate the AWD transfer case. So does anyone know what T-cases bolt to the stock 5.0L and what I assume is a 4R70W? If there is not an easy option, are there any electrical issues that would...

On my SAS, the tracbar as pictured below will hit the D60 centre housing after 5" of up travel. If it was you; would limit the uptravel to the 5" or bend the tracbar to allow more. The max up travel I can get before anything else hits is 10", but I do not know if my 220lbs/in 23" long coils...

I thought I would post up a couple pics of my truck that is being built by myself and Ski at CTmotorsports in brampton. I wheeled it like this And 5 broken axleshafts and two years later I decide it was time to build up. New specs -1990 ranger, 120” wheelbase, front axle about 10” forward...

Since my truck is in pieces i might as well reminisce of when it actually ran