Search results

Wow. Under your name should be... "TTB GURU"

How would a 98+ 4x4 frontend hold up with some 33x15.50x15 swamper sx's on 15x12 wheels? Just mud and dirt roads mainly. I havent had much experience with the ifs and dont know the capabilites.

Anybody know where to get a chrome rear bumper or Headlight clips? I work 7days a week so its not easy for me to get to a junkyard, And I never get off before dark. Ebay has chrome rear bumpers but for $600+. I cant see spending that for a rear bumper!! And the headlight clips(the little...

some swear by em and some wouldn't put them on a pinto

25lbs of boost and launch control is alot lol. But your prolly right, a u-joint or driveshaft will go before the axle will. And with 5.13 gears on 38.5 boggers shouldn't be too awful bad. As long as 5.13's are low enough.

Wow. Super awesome find. Many thanks. I def dont feel bad anymore knowing what i know now. I have a C&C 14Bolt. Again thanks!!

kinda confused. But weld some perches on, shackles, and steering and go. Since its a mud bogger leafs will work fine.

I'm about to order my tires and wheels and just want some opinions and thoughts of my combo. This is on my DD. 98 Ranger, 4x4, 3.0L, 3" body lift, torsion bars cranked. 35x12.50x15 BFG KM2's with Eagle alloy 15x12 bullet holes. Only be seein dirt roads and mild mud holes at the huntin club...

Alright, My 14 bolt came out of a Rollback/tow truck. Its a 10.5 ring gear. I've had a couple people tell me that its narrower than a regular 14-bolt out of a pickup truck. Now is there any truth to this? Because I'm not running a narrow 14-bolt rear with a fullwidth D60 front. No wheel...

still debating on spending that much. Jury's still out on that one. I already have my axles. And before i ran mog axles, I'd run duece and a halfs.

I talked to axletech, The MSRP is $8,495 for the vehicle set. This includes 4 boxes, 2 knuckles, 4 rotors, 4 calipers, 4 sets of pads, 2 adapter plates for the 14 Bolt axle, and 2 custom axle shafts that can be cut to length. I am building inventory right now and the GM 14 bolt parts have just...

You dont hear much talk about them, and all they are is full of benefits! 1.Lifts axle higher off the ground 2.Widens stance 3.Lower's overall gear ratio Why wouldn't some one want a set?? And Also where would someone go abouts finding some?

Sweet. Now I can rub it in his face Haha Rear is the same and IFS hubs on a straight axle will make it the same Correct?

Thanks guys. By the way, me and my boss have been arguing, maybe ya'll can clear it up. He has a 80's model dodge on Rockwell's with 44 gumbo mudders that he use to DD Until motor went out. So if the tires dont stick out he thinks its garbage. Would Toyota axles be too narrow to stick under...

Well this sucks. I have my ranger tore apart waiting on more parts. (8" chevy springs) I was gonna order my gears while I was waiting and ran into a problem. I cant find any gears lower than 4.88 for my 14-bolt rear(10.5rg). My front dana 60 is no prob, I found 7.17's if I wanted to go that...

I just got a 98 Ranger to add to my collection. It has a 3.0L Ext cab 4x4. 140K miles The motor ran, Just skipped horriably and wouldn't stay running unless you kept your foot on the pedal. I'm thinkin its in the heads. So I'm pullin them off and puttin a used lower mileage set on to see if...

I finally Got all my parts to start my sas. :yahoo: 99 Ranger 2wd, with a 2.5L turbo'd. I have a D60 for the front and 14Bolt for the rear. My transfer case is a Np205 divorce mount. Im gonna be running 8" chevy leaf springs in the front, and 6" inches in the rear. And I might extend the...

I've actually seen stock toyota axles handle 44's with a 350 pushing them around. If he would've been in rocks them axles would've blown up, but since it was just mud, worked just fine. OP, what type of wheeling you do?

If he stays outta the rocks he'd be fine. Mud is alot easier on parts then rocks.

I could find much on a search so i figured I'd ask some questions. My 99 Ranger 2.5Turbo 2wd, is my trail/mud truck and will be trailered the rest of its life. I'm in the process of gathering parts now. D60 front 14B rear. I'm Leaning super hard in using a np205 case. I've actually thought...